Tour Start
![Picture](/uploads/8/8/0/8/8808443/706589.png)
This was the first of our many projects to come we had to edit and design these crayons with the starlite backround which took some time but in my opinion it came out good hope you like it :)
Triangle Fish Experiment
![Picture](/uploads/8/8/0/8/8808443/8411944.png)
In this photo on the left i have created our first out of book design. We had to use a variety of tools inorder to create this. We started off with 8 trianlges and layered them all each on top of each other and inorder to do that we have to select each one drop down to arrange and click send to back. On top of that we had to use the line tools to center them as well with click and drag but all of this was hard work but in the end had a good outcome as you can see and in the future there will be more to come.
Project #3 - The Pear
![Picture](/uploads/8/8/0/8/8808443/9354429.png)
This was made using adobe illistrator. I had to use the pen tool to design on each dot and to curve it which made all the curves you can see. It was not a very difficult process we just had to follow. We had to individually design these pieces and trace out the templet that was there for instance we had to make the leaf and stem and then after we had to use the selection tool inorder to move them around in the right spot. Then in the end this was the outcome of the pear that we had to create. Hope you like my pear :}
Holy Rollin 2011'
![Picture](/uploads/8/8/0/8/8808443/3220013.jpg)
This was one of the posters we had to make for the holy name school located on president ave in Fall River MA. This poster was not to hard to make it only used a basic software of Microsoft Publisher. All we had to do for this assignment was take some pictures and backrounds from google.com/images and from there we retreaved alot of nice ideas. As you can see on the backround there is a heavenly type of backround in which that was the idea i was going for because by doing this it gives a feel of the catholic church. This was all based on an assignment we had to do for The Holy Name School because they are having a couple of fall events that we were asked to design posters for I hope you enjoy this poster thanks.
Radio Wave
![Picture](/uploads/8/8/0/8/8808443/2992051.png?318)
This was made in Adobe Illistrator CS3
This was not a very difficult project by far all we had to do wad take what was laready started out for us in our template tour and modify some things by using the following tools :
Clipping oppacity mask
and the last is to use the selections tools and the direction tool which all of these are not hard to use but we accomplished it very well this project ruffly took 15 mins to do.
This was not a very difficult project by far all we had to do wad take what was laready started out for us in our template tour and modify some things by using the following tools :
Clipping oppacity mask
and the last is to use the selections tools and the direction tool which all of these are not hard to use but we accomplished it very well this project ruffly took 15 mins to do.
The clock
![Picture](/uploads/8/8/0/8/8808443/4456058.png)
The clock was a fairly difficult project to do after a while we all eventually got the hang of it we used adobe illistrator cs3 it was a ohk project in my opinion but to list off ht ethings we had to do inorder to finish this project.
We had to first organize the layer by order of how the book wanted them then the next step was to adjust the size and space of the numbers then after that we had to over lay the backround on the clock then we had to layer it down to behind the rest and from there we had a couple easy following steps we had to finalize the clock shape and ther other things about it. Like the 3d structure of it. Thats about it for this project hope you enjoy.
We had to first organize the layer by order of how the book wanted them then the next step was to adjust the size and space of the numbers then after that we had to over lay the backround on the clock then we had to layer it down to behind the rest and from there we had a couple easy following steps we had to finalize the clock shape and ther other things about it. Like the 3d structure of it. Thats about it for this project hope you enjoy.
Project 7 ( part 1 ) Fuzzy Things
![Picture](/uploads/8/8/0/8/8808443/8142785.png)
This project was completed using Adobe Ilistrator CS3.
We used in this step the crystalize tool in which we had to take a symbol from our symbol library and then we had to then use the crystalize tool to make the wings and feathers look very puffed up and extened once done with that we had to zoom in and make sure that the crystilization was at the right setting and if the crystals were not overlapping something we didnt want crystalized. Once this step was done we proceded to file: save: Fuzzy Bird then exit.
We used in this step the crystalize tool in which we had to take a symbol from our symbol library and then we had to then use the crystalize tool to make the wings and feathers look very puffed up and extened once done with that we had to zoom in and make sure that the crystilization was at the right setting and if the crystals were not overlapping something we didnt want crystalized. Once this step was done we proceded to file: save: Fuzzy Bird then exit.
Project 7 ( part 2 )
![Picture](/uploads/8/8/0/8/8808443/2814356.png)
This was created using Adobe Illistrator CS3.
For this project it was fairly simple except we were mostly using CS3 and the design book is from just cs so some of the things we were instructed to do we had to sort of find our way around them and move onto a different part of the project. In this project we had to take this bird or a chicken and then we had to add a cool design to the first layer of the bird and then I made a couple changes to the birds eyes and deleted its wings thus creating the bird on fire as you can see to your left then the final step was to File:Save:Bird. End.
For this project it was fairly simple except we were mostly using CS3 and the design book is from just cs so some of the things we were instructed to do we had to sort of find our way around them and move onto a different part of the project. In this project we had to take this bird or a chicken and then we had to add a cool design to the first layer of the bird and then I made a couple changes to the birds eyes and deleted its wings thus creating the bird on fire as you can see to your left then the final step was to File:Save:Bird. End.
Project 8 Business cards
![Picture](/uploads/8/8/0/8/8808443/2596780.png?221)
This was created using adobe illistrator
This was not a hard project to do all we had to do was first we had to open the project a new template then we had to add the cirles dots that you see then all we had to do was add the lettering and fill them there colors then finally File:save done. In this project we learnt allittle more on how to use a clipping mask
This was not a hard project to do all we had to do was first we had to open the project a new template then we had to add the cirles dots that you see then all we had to do was add the lettering and fill them there colors then finally File:save done. In this project we learnt allittle more on how to use a clipping mask
#8 Cubes
![Picture](/uploads/8/8/0/8/8808443/9136408.png)
This was made in adobe illustartor
This was not a hard project at all because all we had to do was at first take the cube design and then we had to add the black backround and from there proceed to add the letters and title that we were instructed to use and then we had to file:save and then we were done.
This was not a hard project at all because all we had to do was at first take the cube design and then we had to add the black backround and from there proceed to add the letters and title that we were instructed to use and then we had to file:save and then we were done.
#9 The Brochure
![Picture](/uploads/8/8/0/8/8808443/1132614.png?313)
This was made using adobe illistarator.
This was not a very hard project to do by far we used how to use a couple new tools one of which was the gradient tool, and the type tool as well as a reveiw of the fill and stroke tool. This project was not a long project it was schduled for only a half and hour. The step we had to do was change some of the colors of sqaures which have text in them just by simply clicking on the square you want to change and then choosing the right color to fill. Then the next step is we had to change some of the pictures to majke it our own design and then for the final step we had to make a neon like appearance and then we had to File:Save This was by far one of the greatest projects so far and had fun on it.
This was not a very hard project to do by far we used how to use a couple new tools one of which was the gradient tool, and the type tool as well as a reveiw of the fill and stroke tool. This project was not a long project it was schduled for only a half and hour. The step we had to do was change some of the colors of sqaures which have text in them just by simply clicking on the square you want to change and then choosing the right color to fill. Then the next step is we had to change some of the pictures to majke it our own design and then for the final step we had to make a neon like appearance and then we had to File:Save This was by far one of the greatest projects so far and had fun on it.